SHIMANO Deore XT Upgrade Kit M8120 1×12-speed / Newmen Gen2 Micro Spline Freehub Body | Cassette 10-45 Teeth

Description

SHIMANO Deore XT Upgrade Kit M8120 1x 12-speed / Newmen Gen2 Micro Spline Freewheel | Cassette 10-45 teeth

If you own a Newmen rear wheel with Gen2 hub, you can bring your bike up to date with this Shimano Deore XT upgrade kit without putting a lot of strain on your wallet.

The Shimano Deore XT Group has been a top seller on the bike market for years. It is considered perfect in performance, very reliable and durable. The 12-speed version also continues this tradition.

SHIMANO Deore XT shift lever SL-M8100 12-speed right
As one of the contact points, the shift levers are an important link between the rider and the bike. Compared to the M8000 Shifter, the operating forces were reduced by 35% due to a changed gear ratio in combination with a lower cage voltage on the rear derailleur. The tried-and-tested Rapidfire Plus switching logic with levers that can be switched on both sides (2-way release) on the right was adopted from the previous version. However, the M8100 Shifter with its revised interior shifts faster thanks to instant release. The shift cable is released immediately when the lever is actuated, which enables the pilot to react even more quickly to changing route conditions.

With the I-Spec EV version, the lever can be attached to Deore XT M8100 brake levers to save space. In addition, the assembly via the new standard offers a 14 mm wide, lateral adjustment range and the shifter can also be rotated by 60 degrees.

SHIMANO Deore XT rear derailleur 1×12 / 2×12 RD-M8120-SGS Shadow + long cage
The Deore XT M8000 rear derailleur was already known for its clean gear changes and smooth chain running. With the M8100, these properties could be further improved and even faster switching operations realized. In order to be equipped for the extreme bandwidths of the cassettes with 10-45 teeth, the rear derailleur was designed from scratch. The indexing rollers are positioned so that they keep the chain at an optimal distance from the cassette in all gears. The size of this has also grown to 13 teeth. This not only offers the chain better guidance, but also ensures a quieter and more energy-saving run. In addition, the Shadow + system avoids annoying chain hitting on rough ground.
To get the best performance, Shimano recommends using this rear derailleur with 1×12 or 2x 12-speed drives.

SHIMANO Deore XT cassette 12-speed CS-M8100 10-45 teeth
Soft and precise shifting has always been a trademark of Shimano cassettes. With the Hyperglide cassettes of the last generations, the sprockets were placed in such a way that the chain runs extremely smoothly and with little vibration, especially when shifting to a larger sprocket. Shimano introduces Hyperglide + with the XT M8100 cassette. Thanks to this technology, the gear changes now run just as smoothly when shifting into a heavier gear and are 1/3 faster compared to the CS-M8000 cassette.

SHIMANO Deore XT chain CN-M8100 12-speed | 126 links with chain lock
The CN-M8100 chain is specially designed for the M8100 chainrings and cassettes. The chain mates perfectly with the Dynamic Chain Engagement + (DCE +) narrow-wide tooth profiles of the new Deore XT chainrings thanks to the milled grooves on the inside of the link plates. The design leads to a closer fit of the chain on the teeth. Vibrations are avoided and the smoother chain run is not only noticeable when pedaling, but is also expressed acoustically by a quieter drive. Thanks to a new chromed surface in combination with the tried-and-tested SIL-TEC coating, the service life of the chain could be kept at the level of the M8000 chain despite the smaller outside width.

Newmen Gen2 freewheel body for Shimano MTB Micro Spline cassettes 12-speed
This freewheel body enables a Shimano 12-speed cassette to be mounted on your Newmen Gen2 hub. The two ball bearings are also replaced at the same time, so that you are well equipped for the next tasks on your bike.

Compatibility hubs: Newmen Gen2 hubs

Scope of delivery:

1x Shimano shift lever SL-M8100 12-speed right with or without clamp (I-Spec EV version)
1x Shimano rear derailleur RD-M8120 Shadow + SGS (long cage)
1x Shimano cassette CS-M8100 12-speed (10-45 teeth)
1x Shimano chain CN-M8100 12-speed 126 links
1x Newmen Gen2 freehub body for Shimano MTB Micro Spline cassettes 12-speed

without crank
without double shift lever
without derailleur
without brake system
without hubs

Weight according to the manufacturer: not specified
Weight weighed:

Note: The weights may vary depending on the configuration selected.