APlusLift HW-10KOH-A 10000 LB 2-Post Overhead Heavy

Description

Industry Leading 3 YEAR WARRANTY for All Parts (Additional $499 Value)
Combo (Symmetrical and Asymmetrical) Arm Assembly with Adjustable Screw Pads!
CE Certified Lift Structure and Hydraulic System; 6’9″ Lift Height Maximum with Truck Adapters
Durable Powder Coated Finish on Steel; All Robot Welded Structure
Strong Double “S” Column Design; ; Carriage Material Q355 Stronger Than Normal Q235 Steel
APlusLift HW-10KOH is one of most affordable overhead car lifts with 10,000 LB Heavy Duty and Strong Double “S” Column Design.
Specification
CE Certified Lift Structure and Hydraulic System
Heavy Duty Design:
Column Steel Thickness: 13/64″
Carriage Steel Thickness: 15/64″
Arm Steel Thickness: 15/64″
Carriage Yoke Thickness: 5/16″
Base Plate Steel Thickness: 5/8″
Driving Mode: Dual hydraulic cylinders, chain drive
Combo (Symmetrical and Asymmetrical) Arm Assembly:
Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
Rear 2 Stage reach from 33 5/8″ to 52 7/8″
Adjustable Screw pads 4 pieces included
Truck adapters 4 pieces included
Safety Mechanism:
Double point safety lock release
Automatic arm lock restraints
Relief valve built in power pump to prevent overloading
Door guards protection rubber
Up-limit switch to protect cylinders working stroke used in safe length scope
Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
Stiffened base plate 5/8″ thickness
Control System:
Lifting by pressing “UP” button
Manual lowering operation
Relief valve built in power pump to prevent overloading
Overall Height: 143 3/16″
Overall Width: 134 5/16″
Maximum Lift height with Truck Adapters: 81″
Maximum Lift height without Truck Adapters: 75″
Minimum Height of Arm Top: 4.5″
Carriage to Carriage Width (Drive-through clearance): 100″
Column to Column Width: 109″
Time to full rise: 50 sec
Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
Hydraulic Oil: 3-5 gallons AW32/AW46
Concrete Requirement: 6″ at 3500 psi (4″ for vehicles below 9000LB)
Anchor bolts included