Klutch 7500K Arc WelderGenerator with 429CC Kohler Gas Engine and Wheel Kit 60 185 Amp DC Output 6000 Watt AC Power

• Kohler CH440 14 HP, 429cc air-cooled engine with recoil starter
• Smooth 60–185 Amp DC weld output delivers high-performance arc welding
• 6,000 Watt AC power output to deliver the power you need at the jobsite (6,600 Watt peak)
• Capable of welding steel, stainless steel, cast iron, hard surfacing and aluminum — welds up to 3/8in. steel in a single pass
• 5gal. fuel tank provides up to 8 hours of operation on a single fill

Lincoln Electric Eagle 10000 Plus Multi Process Welder Engine Driven Arc MIG Flux Cored and TIG 120 240 Volt 120 225 Amps 70 145 Amps 50 90 Amps

• Works with a broad range of stick electrodes including Lincoln Electric Fleetweld 37 (AWS E6013); Fleetweld 47 (AWS E7014); Fleetweld 180 (AWS E6011); Lincoln 7018AC (AWS E7018 H8); and Excalibur 7018 MR (AWS E7018 H4R)
• Also capable of MIG or flux-cored welding or basic TIG welding in constant current mode
• Choose DC(+) for a deep penetrating arc or DC(-) for less penetration on thin sheet metal
• Rated 225 amps/25 volts/40% duty cycle and 210 amps/25 volts/100% duty cycle for CC
• All rated outputs at 104°F (40°C)

Lincoln Electric Bulldog 5500 Arc Welder Generator with 277CC Kohler Gas Engine 70 140 Amp AC Output 5500 Watt AC Power

• Kohler® 9 1/2 HP gasoline engine with overhead cam and cast iron cylinder liner for long life
• AC welding with up to 1/8in. stick electrode
• 70-140 Amps of AC output for many applications
• 5,500 Watts surge (4,000 Watts continuous) AC generator power to run a grinder, work lights, pump, emergency power and more
• Welds stainless steel, steel, aluminum

Lincoln Electric Outback 185 Arc Welder Generator with 360CC Kohler Gas Engine 50 185 Amp DC Output 5200 Watt AC Power

• Powerful 12.75 HP, 360cc Kohler gas engine with electric start
• 5,700 surge Watts generator power; 5,200 Watts continuous power
• DC stick welding capabilities with up to 185 Amp output
• Welds steel, stainless steel and cast iron
• Welds using up to 5/32in. electrodes

Lincoln Electric Ranger 305G Multi Process Welder Generator with 674CC Kohler Gas Engine and Electric Start 20 305 Amp DC Output 9500 Watt AC Power

• Powerful 23 HP, 674cc Kohler gas engine with pushbutton electric start
• 10,500 surge Watts generator power; 9,500 Watts continuous power
• Multiprocess stick, TIG, wire and pipe welding capabilities and arc gouging with up to 300 Amp output
• Welds steel, stainless steel and cast iron
• Welds using up to 5/32in. stick electrodes

Lincoln Electric Ranger 305 LPG Multi Process Inverter Welder Generator with 25 HP Kohler LP Gas Engine and Electric Start 300 Amp DC Output 9000 Watt AC Power

• Specially designed for environments where gasoline and diesel emissions are not acceptable
• Provides the ability to weld indoors where other fuels cannot be used due to fumes and potential explosiveness of the fuel
• Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire and MIG (CO2 and mixed gas) welding
• Innovative, first in the industry skewed rotor design provides AC power suitable for operating Lincoln Electric® inverter power sources
• Rugged reliability welding and AC generator

Lincoln Electric Vantage 322 Multi Process Inverter Welder Generator with 22 HP Kubota Diesel Engine and Electric Start 30 400 Amp DC Output 1800 Watt AC Power

• Industrial Kubota® V1505 EPA Tier 4 diesel 4-cylinder 1800 RPM engine runs smooth and quiet
• Standard engine gauges allow you to monitor performance at a glance
• 20 gallon (76 liter) fuel tank provides longer run times
• Innovative Service Access includes a lockable, removable sliding engine access door to provide ample space for engine and oil filter work without requiring a large clearance space on your truck
• 55% more access than competitive models

Lincoln Electric Ranger 250 GXT Stainless Steel MultiProcess WelderGenerator with 23 HP Kohler Gas Engine and Electric Start 50 250 Amp DC AC Output 11000 Watt AC Power

Hobart AirForce 12ci Plasma Cutter with Built In Air Compressor Inverter 115V 12 Amp Output Model

• Lightweight, powerful inverter design
• Cuts mild steel up to 1/8in. @ 10in. per minute; 1/4in. mild steel @ 3in. per minute
• Also cuts stainless steel, aluminum, brass and copper
• New XT12R torch is more efficient and comfortable with an ergonomic handle and cables that are extra flexible
• Built-in piston-driven air compressor