Find the right fit for your vehicle
Sign in see your frequently purchased items at your club.
Showing 751–775 of 3442 resultsSorted by latest
The No. 898 Combo Case will hold 3″ or 6″ irons plus a roll of seam tape. There is also room for the iron’s cord and an extension cord. Heavy duty all steel construction.
The extended spindle, low profile cutting head, and flush-mounted blade of this saw allow it to cut all the way against the inner wall of a toe-kick for removing old underlayment. Saves time and serious hard work!
Lifts the LVP plank to the angle where it can be tapped and locked tight. Works on planks and tiles up to 10mm thick.
This versatile light-duty saw undercuts along walls, door jambs, under toe spaces, and will also fully undercut inside corners.
The Bullet Vinyl Cutter makes high quality end cuts on even the thickest vinyl planks and includes a built-in tool case.
This blade cartridge can be installed in your Bullet Cruiser to allow for cutting carpet tiles!
This heavy duty, multi-purpose double-faced tape can be used for a variety of applications such as with carpet wall base, vinyl and rubber cove base, vinyl moldings and trim, stair treads, PVC moldings and trim, paneling, engineered hardwood flooring and countless other applications.
This heavy duty, multi-purpose double-faced tape can be used for a variety of applications such as with carpet wall base, vinyl and rubber cove base, vinyl moldings and trim, stair treads, PVC moldings and trim, paneling, engineered hardwood flooring and countless other applications.
A rugged universal paddle mixer for mixing jobs of up to 17 gals. With Hexafix quick-action coupling.
Includes: WK 140 HF mixing paddle for finishing plaster, stucco, mortar, cement screed, and much more.
Compact and lightweight 1-gear paddle mixer for a wide range of mixing jobs with capacities of up to 10 gals. Upright working position with ergonomically adjusted handle. High-performance components for long-lasting and reliable use. With rubber buffers that allow the paddle mixer to be placed gently and safe for damage. With HEXAFIX quick-action coupling.
Includes: WK 120 HF mixing paddle for finishing plaster, stucco, mortar, cement screed, and much more.
The Collomix WK140HF is designed for all sticky and viscous materials. This includes masonry cement, joint cement, stucco, grout, and epoxy resin grout.
Suitable for diverse applications, this mixing paddle is notable for very good conveyance of the material. Two mixing helices for easy guidance in the material and minimal stress on the machine.
Suitable for diverse applications, this mixing tool is notable for very good conveyance of the material
The super-fast turbo mixing paddle. The paddle generates a strong flow from the bottom up. Optimal flow conditions when used with high speed drives.
The LevMix 65 gives you the ability to quickly mix and pour self-leveling compounds with perfect results. Saves you time and money from start-to-finish!
This mixing paddle generates high shear forces for a powerful effect and prevention of lump formations. Easy to clean because material does not stick.
This mixing paddle generates high shear forces for a powerful effect and prevention of lump formations. Easy to clean because material does not stick.
Collomix 8 gallon mixing bucket plastic mixing bucket with metal handle; 8 gal. / 1.1 cu.ft max. capacity; made of high-quality polyethylene; strong and durable; ideal for fillers and many other materials; 15″ wide; 17″ high.
The DLX mixing paddle was specially developed for the optimum preparation of thin-bed mortar for the cementing of concrete precision blocks. The two turbine blades, fitted one above the other, provide a strong flow of material to prevent the formation of lumps.
Quick Pitch is a shower floor drainage kit that creates a perfect shower floor-base slope to drain the water from the shower floor. The Standard Kit (QPK-101) is used for standard 36″ x 60″ shower areas with a centered drain, or custom shower areas where the drain is within 36″ of each wall.
The Standard Kit includes 6 each Float Sticks (1″ to 1-3/4″ taper x 36″ long) and Center Ring.
These hard plastic Horseshoe Tile Spacers are precision injection molded for accurate, evenly spaced grout joints. They are suitable for use with all types of tile installations regardless of tile thickness or tile layout pattern.
These hard plastic Horseshoe Tile Spacers are precision injection molded for accurate, evenly spaced grout joints. They are suitable for use with all types of tile installations regardless of tile thickness or tile layout pattern.
This handy stand-up carpet cutter is easy to use and the perfect tool for cutting both carpet and resilient floors without having to crawl. Essential for cutting carpet into strips before tear out jobs.
New free shipping for plus become a plus member